Download and install JMRI®
JMRI Setup and Installation
JMRI environments...
Release Notes
Supported Hardware
Devices, command stations, networks, and protocols:
Source Code
Issues

JMRI Help:

Contents Index
Glossary FAQ

Donate to JMRI.org

Release Notes for JMRI 4.9.3 release

Date: August 20, 2017

From: Bob Jacobsen

Subject: Test Release 4.9.3 of JMRI/DecoderPro is available for download.

Notes:

This is a test release. Please post a note if you encounter any new or old bugs! And please back up your JMRI files before installing this, in case you want to go back to an earlier version.

This is the next in a series of test releases. We expect this series to end in the next JMRI production release around the end of 2017. (See the tentative release schedule)

Some of the changes involved are quite extensive. They may require a certain amount of experience before they are working well. Therefore, this test release should be considered experimental.

JMRI is now only available under the GNU General Public License. For more information, please see our copyright and licensing page.

after image before image

Required Migration StepSince JMRI 4.7.4

JMRI was updated in JMRI 4.7.4 to use a new serial library. Depending on your exact circumstances, you may need to do some migrations:

Known problems with this release

New warnings for this release:

Older warnings

See the JMRI 4.8 release note for more warnings predating the 4.9 development series. These may be relevant to you if you're updating from an earlier version.

Since JMRI 4.7.6 If you're having trouble getting your DCC programmer to work, try checking that the "Defaults" under "Preferences" are set to your hardware system. The reason: This version of JMRI (and all later) provides more options for "default systems": If you have multiple sets of hardware attached, which should be used for throttles, for programming, etc. JMRI tries to guess the right settings for these when you upgrade to this version, but apparently it sometimes gets that wrong (we haven't been able to track that down yet). Setting them manually fixes any wrong guesses.

Since JMRI 4.7.5 This version of JMRI (and all later) writes a slightly streamlined version of panel file contents. Older files should still be readable by this version of JMRI, but files written by this version may not be readable by versions before JMRI 4.2 depending on their contents.

Since JMRI 4.7.5 The LocoNetOverTCP server has changes that may break scripts that reference it. Scripts refering to the class jmri.jmrix.loconet.loconetovertcp.Server need to refer instead to jmri.jmrix.loconet.loconetovertcp.LnTcpServer.

Since JMRI 4.7.3 This release will not start cleanly if installed over earlier versions of JMRI (the Windows installer ensures this is not an issue). Remove the JAR files jackson-annotations-2.0.6.jar, jackson-core-2.0.6.jar, and jackson-databind-2.0.6.jar from the lib directory within the previous installation directory to resolve this.

Since JMRI 4.7.1 JMRI no longer supports the portable paths resource: or file: that were deprecated in JMRI 2.13. When loading a panel, an error message will be displayed if the panel contains a path that starts with resource: and the panel will not load until changed using an external editor. Paths starting with file: cannot be automatically flagged because JMRI allows file: URLs.

Since JMRI 4.7.1 The LocoNet Server (the LocoNetRMI service; not the LocoNetOverTcp service) in this version of JMRI doesn't properly interoperate with JMRI 4.7.1 through JMRI 4.7.4. It does work fine with JMRI version 4.6 or before. If you encounter a problem with version compatibility, you'll see an error message that includes "local class incompatible". The workaround is to update both client and server JMRI machines to the same JMRI version.

Since JMRI 4.7.1 JMRI applications will not load a panel file that fails XML validation; an error will be shown that should explains the error, allowing it to be fixed using an editor. (The explanations remain a work in progress.) If you have a problem loading a panel file, please

Since JMRI 4.5.6 As part of fixing the TMCC throttle issue, the handling of TMCC preferences was changed. If you have a TMCC connection configured, please go to the "Defaults" pane in the Preferences window and make sure that the TMCC connection is selected for the appropriate device types.

Since JMRI 4.5.2 This and future releases of JMRI may not function on OS X if the Java SE 6 provided by Apple is installed. OS X operating system updates routinely remove this version of Java SE 6. Please raise any issues concerning this on the user's group. To remove Java SE 6 from OS X, follow these steps (these steps assume JMRI is installed in the folder /Applications/JMRI, if not, adjust the following paths as needed):

  1. Open Terminal.app.

    El Capitan only: Reboot into Recovery Mode by restarting your Mac and pressing Cmd-R until the Apple logo appears. Once in Recovery Mode, select Terminal from the Utilities menu.

  2. Run the command /Applications/JMRI/PanelPro.app/Contents/Resources/uninstall-java6.sh It can take up to a half hour to complete. Wait for the message Removed Apple Java SE6.

    El Capitan only: Run the command bash /Volumes/Macintosh\ HD/Applications/JMRI/PanelPro.app/Contents/Resources/uninstall-java6.sh /Volumes/Macintosh\ HD It can take up to a half hour to complete. Wait for the message Removed Apple Java SE6.

  3. El Capitan only: Restart your Mac.

Since JMRI 4.5.2 Support for directly executing AppleScript within JMRI has been removed due to changes in macOS and Java outside our control. If you require the ability to use AppleScript, you may be able to add this capability on your own by visiting JMRI AppleScript Support, but please be aware that this may not work on upcoming releases of macOS or Java.

Since JMRI 4.5.1 Internal turnouts and sensors need to have complete, individual system names. The names "IT" and "IS" (without any suffix) are no longer permitted: "IT12" is fine, but just "IT" is not. Most panel files that contain these should automatically migrate them to new names when saved, but in some cases you might need to manually update them.

Since JMRI 4.9.2 JMRI saves the Uhlenbrock connection's "baud" rate as an Internationalized string, and, upon loading a configuration profile, requires an Internationalized "baud" rate in the .XML file. JMRI will fail to properly configure the serial port if the "baud" rate from the configuration profile does not match one of the baud rate strings for the current Internationalization "locale". If you experience problems where JMRI start-up of a Uhlenbrock-based connection does not configure the serial port, it may be necessary to edit the connection's preferences, select the appropriate "baud" rate, save the connection. This updates the configuration profile .XML file to use one of the "baud" rate strings expected by the Uhlenbrock-specific code in JMRI. It is necessary to re-start JMRI for this change to take effect.

Download links:

Please note that the download links in this and future JMRI releases link to Github servers. If that doesn't work for you, the files up to 4.11.x are also still available from the SourceForge.net servers. Please let us know of any problems.

Changes since test release 4.9.2:

The list of included commits is available from our GitHub code repository.

New / Updated decoder definitions

ESU

Layout Editor

Internationalization

Miscellaneous