Decoder Family: Rapido
Slow increase at slow speed
Fast increase at slow speed
Reset delle CV ai valori di fabbrica MRC NOTE: Some DCC systems do not have enough power on the program track for programming sound decoders. If your system is one of these, There are Program Track Boosters availlable from aftermarket DCC suppliers. MRC NOTE: The decoders in your Turbo support all program methods, including: register mode, paged mode, CV programming mode, direct mode, and programming on the main (OPS mode programming). Program the Turbo the same way you would program any other NMRA-compatible decoder with your DCC system. Although the sound decoders in the Turbo support "read back on a program track", there may be some DCC systems that either do not support reading back decoders, or do not have the capability to read back sound decoders. MRC
This page was produced by
Copyright © 1997-2018 JMRI Community.
JMRI, DecoderPro, PanelPro, DispatcherPro and associated logos are our trademarks.
Additional information on copyright, trademarks and licenses is linked here.
Site hosted by: